 HomeNewsPrecautions for using insulating glass production line equipment

Precautions for using insulating glass production line equipment

2022-07-07

The insulating glass processing equipment can complete the production of insulating glass with high energy, and enjoys a high reputation in the insulating glass processing industry. As the saying goes, there is no square without rules. All equipment has its own operating procedures and specifications. When operating the Insulating Glass Production Line, the operator shall strictly follow the operating procedures of the insulating glass processing equipment. What are the operating procedures of the insulating glass processing equipment? Please pay attention to the following:

1. Startup sequence of insulating glass production line: first check that the water in the water tank of insulating glass processing equipment is sufficient, then turn on the water pump and adjust the water spray pipe above the white sponge roller to ensure that all positions of the sponge roller can be flushed. Then clean the impurities and dirt on the sponge roller by hand, and ensure that the sponge roller is completely foamed and expanded. Note that when opening the insulating glass production line in winter, do not open the cleaning conveyor first. Because two adjacent sponge rollers will be frozen together in winter, opening the transmission without being soaked will cause the sponge roller to be torn.
2. Then open the cleaning conveyor, place the hollow glass to be processed on the conveyor wheel, and pay attention to the glass must be placed stably to prevent the glass from falling and hurting people during transmission.
3. Butyl glue applied on the aluminum spacer strip shall be uniform and applied on the whole surface of the aluminum strip to prevent glue leakage and burr. And it adopts excellent butyl glue to ensure that the aluminum strip and glass stand together firmly. It is forbidden to stick dust on the aluminum spacer after coating.
4. The two-component sealant shall be applied firmly and the surface shall be smooth, especially at the corners to prevent air leakage and air escape.

Previous: Insulating Glass Machine(4 containers)Delivery to Canada

Next: Three major directions for the future development of the insulating glass equipment industry