①Greater energy saving effect High-performance insulating glass, due to a layer of special du metal film, can achieve a shielding coefficient of 0.22-0.49, which reduces the load of indoor air conditioning (air-conditioning). The heat transfer coefficient is 1.4-2.8W (m2.K), which is better than ordinary insulating glass. It also exerts great efficiency in reducing indoor heating load. Therefore, the larger the window is opened, the more obvious the energy-saving effect. ②Improve the indoor environment High-performance insulating glass can intercept considerable energy from the sun into the room, thus preventing discomfort caused by radiant heat and reducing dazzling caused by sunset sunlight. ③Rich tones and artistry High-performance insulating glass has a variety of colors, which can be selected according to needs to achieve a more ideal artistic effect. Extended information The use of hollow glass is suitable for public facilities such as office buildings, exhibition rooms, libraries, and special buildings such as computer rooms, precision instrument workshops, and chemical factories that require constant temperature and humidity. In addition, it can also be used for sun protection and anti-dazzling places. Note: Dry air is enclosed in the hollow glass. Therefore, according to changes in temperature and air pressure, the internal air pressure also changes, but only a small deformation occurs on the glass surface. In addition, slight warpage may occur during manufacturing, and distortion may also occur during construction. Therefore, including such factors, sometimes there are corresponding changes in reflection, which should be paid attention to. Different colors have different reflections. Gold, copper and silver metal coatings have high reflectivity in the mid-to-far infrared region, that is, when the wavelength range is greater than 4μm. If the metal coating has a typical thickness, the total reflectivity can reach 90%-95%. High infrared reflectivity is equivalent to low emissivity (Low-e), which will reduce the radiation conversion between the inner and outer glass plates of the insulating glass component. Correspondingly, compared with the standard hollow glass member with an air layer of 12mm, the thermal insulation value can be from 0.3W/(m2.K). In addition, if the air in the component is replaced by heavy gas, the insulation value is 1.4W/(m2.K).
If we want to inprove the insulating glass quality,then we need to find a good insualting glass machine supplier.Jinan Weili Machine CO.,LTD it is your best choices for insualting glass machine